3 Main Causes of Leaky Faucets
3/4/2021 (Permalink)
Principal Causes Of Leaky Faucets
Did you know that a leaking faucet can waste a swimming pool’s worth of water every year if not repaired? This adds up to about 10,000 gallons of water per leak. If your house in Fergus Falls, MN has a drip that just won’t quit, you can fix it yourself if you know the basics. Read on to discover the principal causes of leaky faucets and what to look for when repairing them.
1. Faulty Washer
A washer is a thin metal or plastic disc with a hole in the middle that functions as a spacer or to distribute load in compression-style faucets (those with separate handles for hot and cold). Whenever you turn the dripping faucet on or off, it subjects the washer to friction that wears it down. Take the old washer to a hardware store to find the correct replacement part and install it in the faucet. Incorrectly placed washers can also cause leaks, so if the leak continues, try adjusting it.
2. Damaged O-Ring
Cartridge faucets use a single valve to control the flow and temperature of water and contain rubber o-rings that form a seal near the handle or spout. (This style of faucet often has a decorative cap on the handle if you’re unsure what kind you have.) Find the o-ring inside your leaking faucet and replace it with a new one.
3. Worn Valve Seat
The valve seat is another component of a compression faucet and is the connection between the spout and the faucet. Over time, minerals in the water eat away at the valve seat, causing it to corrode. This happens faster if you have hard water, and will probably be apparent upon inspection of the part. Cleaning or replacing the valve seat should enable you to have a fixed leak.
If left alone, a leaking faucet can cause more extensive damage that requires the help of emergency restoration services. Save yourself unnecessary stress and expense by fixing those drips as soon as you discover them.